| Description
The PROP-CAN 60A is a micro-controller steered modul e.g. for automotives applications, which over a PWM signal two integrated half bridges controls.
These half bridges are designed for, that each current can be up to 30A withstand. By the duty cycle of the PWM can over the time the averaged
current to be varied almost steplessly. in order to limit and to regulate the current flow per half bridge, it is measured and evaluated over the
micro controller. Free configuring and programmability make the realization possible of most different applications. The PROP-CAN 60A module is conceived
for roughest site conditions and can be used thus variously.
Scope
For communication with the micro CONTROLLER a CAN periphery stands after the ISO11898 standard for order. 6 analogue Inputs, free programmable Each half bridge with 30 A load resistive und inductive loads can be independently controlled additionally 4 HSD-Outputs, short circuit protected Duty cycle 0 -100 % Frequency range 20 - 5.000 Hz Rampenbereich 0 - 20 ms / 0,1% both half bridges can be control synchronously a load
| 
Controller
