Description
Impulse relay are applied to switch on and off consumer for defined time period. One can choose betweeen 5 time spans (see table below). Different time periods we offer on demand. Please specify the required pulse length in your order.
Application Example
Preheat time
Function Diagram S1:To terminal 30 supply voltage is applied. If signal voltage is applied to terminal 15 shortly or permanent, the relay switches for the given time period and switches off afterwards.
Diagram S2: Supply voltage is applied at terminal 87z. If signal voltage is applied at terminal 15 shortly or permanent the relay switches for the given time period and switches off afterwards. Is control voltage taken away before, the relay switches-off directly.The contacts are seperated from the trigger, therefore they can be used in combinations.
All diagrams: The duration of the input signal has no impact on output pulse duration. The exact pulse length can be adjusted via Poti within the given time period.
For different housing please see in the chapter housing and baseplates.
Function Diagram Technical data
operating temp.: -40 °C to 85 °C
mpulse time: see time intervalls
continuous current: 10A/15A (Ö/S)
Time tolerance: ± 1 %
Ingress protection: IP53 (with poti cover)
Quiescent current: 250 µA
EMC: 95/54 EG; DIN 40839
e1 approval-no.: 023218
Design Connection diagram additional ordering data Time interval | Time indication | | xx = 01: | 0.5 - 5 sec.
| | xx = 02: | 1 - 30 sec.
|
|---|
| xx = 03: | 0.5 - 60 sec.
|
|---|
| xx = 04: | 0.5 - 900 sec.
|
|---|
| xx = 05: | 0,5 - 4000 sec. |
|---|
| 
Impulse Relay
