Description
The mirco PLC CAN is a very small controller for automotive applications. Thanks to is free configureability and programmability, many diffrent applications can be implemented. Control and readout run via CAN-Bus (ISO 11898-2).
Application Examples
Door control
Seat contact check
Pressure monitoring
Special vehicles, machine automation
decentralized extension of function
Function Freescale microcontroller with flash memory (option to write many times). There are availlable 2 analog and/or 1 analog input/1 digital output as well as 2 overload protected highside power outputs - alternatively 1 relay output. More complex applications can be realised in C code. The functions as well as the measurement values can be controlled and readout via CAN-Bus. The programming is possible via the software MRS Developers Studio and graphically with CANgraph. By use of the powerful processor, the Micro PLC is CANopen- und SAE J1939-compliant.
For different housing please see in the chapter housing and baseplates.
Technical data
operating temp.: -40 °C to 85 °C
Quiescent current: <250 µA (stand by)
Quiescent current: 30 mA (idle)
cont. current relay: 10A/15 A (no/nc)
HSD output: each 60 W at 12 V
HSD output: each 75 W at 24 V
Status output C: Control lamp (max. 2W)
Bus system: CAN-Bus (High-Speed)
at: ISO 11898-2
Ingress protection: IP53
Design Connection diagram | 
Automotive PLC and prog. Tools with CAN
