Description
The application range of toggle time-delayed M3 is the switch-on and -off of loads by impulse operation with a limited on-time. Please specify the required on-time in your order.
Application Example
Rear window heater with time delayed reset
Function Diagram S1: Using toggle relay a load can be switched on and off via push button. If a positive impulse is applied at terminal 15, the relay switches its state (on or off). The on-time is limited.
Diagram S2: The contacts are seperated from the trigger, therefore they can be used in combinations. Regarding version S2 the relay contact is completely potential-free thus it is able to switch alternating voltage.
For different housing please see in the chapter housing and baseplates.
Function Diagram Technical data
operating temp.: -40 °C to 85 °C
continuous current: 30 A
max. switching volt.: 75 VDC
max. switching curr.: 60 A
max. switch-on curr.: 100 A
Quiescent current: 1 mA
EMC: 2006/28/EG DIN 40839
Ingress protection: IP53
IP65: on customers request
e1 approval-no.: 03 5388
Design Connection diagram | 
Toggle relay
