Description
Flasher units start/stop compact are used for indicators and warning signals. The flasher unit can be used for different types of vehicles.
Function All diagrams: If supply voltage applied to terminal 30/87z the flasher starts immediatly. It generates 90 ±30 pulses per minute. The output can drive up to 20 A, higher loads can be driven by by using a power relay.
Technical data
operating temp.: -40 °C to 85 °C
continuous current: 30 A
max. switching volt.: 75 VDC
max. switching curr.: 60 A
max. switch-on curr.: 100 A
Quiescent current: 1 mA
Flash frequency: 90 ±30 Impulses per min.
EMC: 2006/28/EG DIN 40839
Ingress protection: IP53
Life span: 1 x 105 with ohmic load
e1 approval-no.: 035213
Design Connection diagram | 
Flasher Unit
